2025 Newest Mini Invasive Diode Laser 980nm Removal Body Fat Endolaser Facial Lifting Lipolysis Body Shaping Slimming Machine

• Customization: Available
• Type: Slimming Machine
• Theory: Laser
• Model NO.: Yaser
• Application: Salon, Clinic
• Portable: Portable
• Laser Type: Diode Laser Gallium-Aluminum-Arsenide Gaalas
• Wavelength: 60W
• Working Modes: Cw, Pulse and Single
• Aiming Beam: 650nm
• Fiber Diameter: 600
• Fiber Type: Bare Fiber
• Fiber Connector: SMA-905 International Standard Interface
• Pulse: 0.00s-1.00s
• Delay: 0.00s-1.00s
• Voltage: 100-240V, 50/60Hz
• Transport Package: Air Box
• Specification: 51*47*46cm
• Trademark: Triangelaser
• Origin: China
• HS Code: 8543909000
• Production Capacity: 1000 Pieces/Year

Product Description

2025 Newest Mini Invasive Diode Laser 980nm Removal Body Fat  Endolaser Facial Lifting Lipolysis Body Shaping Slimming Machine

Product Description

Laser assisted lipolysis is a minimally invasive procedure for the removal of stubborn pockets of fat. It can effectively reduce areas of fat resistant to diet or exercise with minimal side effects than traditional liposuction. The procedure uses a laser to effectively "melt" unwanted fat and then either allows the body to metabolize the melted fat or uses "aspiration", a form of suction that allows the practitioner to remove greater quantities of fat.

How Does Yaser 980nm Work For Lipolysis?
The procedures were performed in the hospital, and the type of anesthesia was general, regional (epidural), or local with sedation, according to the extent and indications of each case. using a 0.9% saline solution with a temperature of around 4°C, and 1:500,000 epinephrine. The infiltration was performed preferably with the aid of a continuous pressure system at 150mm Hg, provided by placing the reservoir solution with a cuff pressure drop, to allow a homogeneous distribution during infusion with a 2-mm-diameter needle. A uniform deposit was performed only in the deepest layer, parallel to the muscular plane, to avoid tunneling the fat tissue. The infused volume was equivalent to the estimated volume drawn from each region. This infiltration technique took 7 to 8 min to infuse 1 liter into each decubitus, an ade -quate period for vasoconstriction.

A 980-nm-wavelength diode laser equipment was used in all treatments. A 2-mm-diameter rigid cannula with a 600-µm optical fiber was used to transfer energy to the tissues. The passage of the laser was initiated in the deep layers, with slow fan-shaped movements, at a rate of about 2.5 cm/s, from the incision, with application of back-and forth laser movements, always with the free control of the operator's hand on the treated region to maintain the distance from the end of the fiber to the surface. At the end of the outward stroke of each passage, the fiber end was maintained at a safe distance from the skin, with the aid of a red light display, in order to avoid injury. After the passage of the annula into the deeper plane, passes were made with the same care in the middle plane, and then the more superficial plane to the skin surface.

For body treatment, power was maintained between 18 and 22W, except in the submental region, inner arms, andthighs, where 14 to 16W was used.

Laser Fat Removal Treatment Areas Include:
Chin / Jawline
Arms
Braline
Abdomen
Hips
Buttocks
Thighs
Knees

Yaser 980nm Uses Local Anesthesia
Yaser 980nm is laser-assisted liposuction performed under local anesthesia, in which the patient is awake and aware throughout the procedure. The typical local anesthesia that is utilized is the highly effective numbing agent, lidocaine, which provides the patient with a virtually painless procedure. Local anesthesia is the safest form of anesthesia, decreasing risk of complication because the patient is awake and its effects last many hours post procedure, decreasing the need for narcotic pain medications after surgery.

Yaser is Minimally Invasive and Fat Cells are Melted
During a Yaser procedure, very tiny incisions (approximately 1/8") are placed in the skin, allowing a micro-cannula encasing the laser fiber to be inserted underneath the skin. The laser's heat energy simultaneously melts the fat cells and tightens the skin. The liquefied fatty fluid is suctioned out of the body.

The tightening provided by the heat of the laser results in smoother skin that gradually appears after the swelling has subsided, typically 1 month post-procedure. Final results are expected 6 months following surgery.

Yaser 980nm Downtime & Pain
Following a typical procedure, patients maintain mobility and are able to walk themselves out of the office. Patients are able to resume normal activities and return to work 1-2 days post-procedure.

Patients will need to wear a compression garment for 4 weeks post-procedure, but can resume low impact exercise in 3-5 days.

Patients should expect to feel sore for several days post procedure, however, the pain should not hinder normal daily activities.

Patients should expect minimal bruising and some swelling after undergoing a procedure, which will dissipate gradually over two weeks.

Before and After

 

 

 

 

Treatment process

Smartlipo Yaser 980nm laser liposuction is usually done in the doctor's clinic under local anesthesia & the laser actually makes any wrecked blood vessels to clot instantly, decreasing bruising dramatically. This process results in very negligible bleeding, bruising or swelling, making it the most sought after fat removal procedures among the adults.

Product Application

Smartlipo Yaser 980nm laser liposuction is very effective at targeting stubborn pockets of fat in all areas of the body including:

* the buttocks

* hips and thighs

* abdomen and stomach area

* upper arms

* breast and chest

* neck and chin

* knees

Laser liposuction is a particularly effective treatment for sensitive areas such as the face and neck, where minimal scarring is preferred.Liquefying the fat cells before suctioning them out decreases the risk of contour irregularities. This results in a much smoother skin surface.

 

Product Parameters

Laser type	Diode Laser Gallium-Aluminum-Arsenide GaAlAs
Wavelength	980nm
Power	1-60W for 980nm
Working Modes	CW, Pulse and Single
Aiming Beam	Adjustable Red indicator light 650nm
Fiber type	Radial fiber
Fiber diameter	600 Fiber
Fiber connector	SMA-905 International standard interface, special quartz optical fiber laser transmission
Pulse	0.00s-1.00s
Delay	0.00s-1.00s
Voltage	100-240V, 50/60HZ
Size	60*45*40cm
Gross Weight	20kg

 

Company Profile

TRIANGEL RSD LIMITED,is one of the specialized manufactures focused on the Aesthetics &Medical laser equipment in
China,established in March 2010.We have our own repair companies & training centers in several countries,like
Portugal,Russia,Australia,South Africa... could offer the technical support and clinical training in the fast and efficient
way.TRIANGEL got different certificates for clients from all over the world.Medical CE,ISO13485,RoHS;We also take part in
exhibitions every year,Cosmoprof Asia(HongKong),DUBAI DERMA, INTERCHARM(Moscow),
Expocosmetica(Oporto),AMSCA(South Africa)... 
TRIANGEL,hope to be your Responsible,Sincere and Dependable partner in China!

Buyer feedback

FAQ

1.What Is The facelift Laser Lipolysis Machine?

The 980nm 1470nm facelift laser is a minimally invasive procedure that uses cutting-edge laser technology to tighten and lift sagging, aged skin. The effects reach both deep and superficial layers of the skin to stimulate collagen production whilst also reducing excess fatty tissue.

2. What areas can be treated with laser lipolysis?

It is ideal for small pockets of fat resistant to diet and exercise, as well as for areas difficult to treat with traditional liposuction. Common treatment areas include the thighs, upper abdomen, belly, arms, chin, hips, and more.

3. How long does the procedure take?

Although the actual time it takes to perform the procedure varies depending on the number and extent of the areas treated, on average it can take between 1 and 2 hours.

4. What is the recovery time?

Laser lipolysis provides faster recovery than traditional liposuction. Routine activities can be resumed in a day or two. However, you will be advised to wear a postsurgical garment for one to two weeks to help with the healing process.

5.When Can I Expect To See The facelift Laser Lift Treatment Results?

980nm 1470nm facelift Diode Laser Machine is one of the few minimally invasive procedures with an immediate rejuvenating and skin tightening effect.

6.Is the 980nm treatment long lasting?

Yes! Over the course of a few weeks, the body begins to produce collagen naturally in the deep layers of the skin. As mentioned above, this will continue to build up over the following 6-12 months and improve the appearance of the skin long after the procedure.980nm procedure destroys and removes the treated fat cells. Adults do not create new fat cells. When a person gains weight, that person's fat cells simply expand. Should you gain weight, that fat will most likely be deposited in areas where the procedure was not performed.