TR-B 980 1470nm Laser Lipolysis Slimming Machine Beauty Liposuction Fiberlift Facelift Laser
Laser lipolysis comprises the subcutaneous application of laser under tumescent anesthesia in the treated area of the body, with or without the subsequent aspiration of molten fat. When in direct contact with the subcutaneous tissue, the energy relea-sed by the laser inflicts irreversible damage on the adipocytes, in addition to thermal damage to the dermal collagen fibers, sti-mulating neocollagenesis and, later, a skin-tightening effect.
Advantages over traditional liposuction, such as shorter recovery time, milder surgical trauma, decreased blood loss, as well as less pain, bruising, and post-surgical swelling, have been demonstrated. The improvement in elasticity and retraction of the skin promoted by laser lipolysis have made this technique an interesting alternative for defining the body's contour. Like tumescent liposuction, laser lipolysis can be performed in an outpatient setting, yielding high rates of patient satisfaction and low rates of complications.
Therapeutic theory
TR-980nm+1470nm acts by thermal effect, breaking the fat cell membranes and blending its content. The semi-liquid fat can be easily
removed or in case of small quantities is metabolized and naturally eliminated by the body. The heat generated by laser energy also coagulates blood vessels, restructures collagen, improves skin elasticity and promotes tissue contraction of the treated areas. It is a minimally invasive technique with excellent aesthetic results and minimum postoperative.
|
Laser type |
Diode Laser Gallium-Aluminum-Arsenide GaAlAs |
|
Wavelength |
980nm+1470nm |
|
Power |
1-30W for 980nm, 1-17W for 1470nm |
|
Working Modes |
CW, Pulse and Single |
|
Aiming Beam |
Adjustable Red indicator light 650nm |
|
Fiber type |
Bare fiber |
|
Fiber diameter |
400um, 600um, 800um Fiber option |
|
Fiber connector |
SMA-905 International standard interface, special quartz optical fiber laser transmission |
|
Pulse |
0.00s-1.00s |
|
Delay |
0.00s-1.00s |
|
Voltage |
100-240V, 50/60HZ |
|
Size |
48*40*30cm |
|
Weight |
6kg |
Product Description
What are the benefits of TR-B 980nm 1470nm?
Fiberlift can help you achieve surgical lifting results while avoiding the disadvantages of traditional surgery, such as a longer recovery time and a higher rate of surgical complications. Most people prefer the its treatment because it: -does not require incisions or anesthetics. -provides immediate and long-lasting results. -can be performed in one session with no downtime. -can be combined with other aesthetic treatments.
Permanently melts away fat in just one treatment with TR-B 980nm 1470nm
TR-B endo-lifting by Triangelmed is a laser treatment that treats minor skin sagging and fat accumulation on the face by remodeling the deep and superficial layers of the skin. This treatment can also increase collagen production, resulting in a tighter, more youthful appearance. It is an alternative to surgical lifting and is ideal for people who want a non-surgical facelift. It can treat other parts of the body as well, such as your neck, knees, tummy, inner thighs, and ankles.
Why 980nm+1470nm?
Optimal degree of water absorption in the tissue, emits energy at the wavelength of 1470 nm. The wavelength has a high degree of water absorption in the tissue,and 980 nm provides high absorption in hemoglobin. The bio-physical property of the wave used in the Laseev laser means that the ablation zone is shallow and controlled, and therefore there is no risk of damage to adjacent tissues. Additionally, it has a very good effect on blood (no risk of bleeding). These features make the Laseev laser a safer..
Advantage:
Power
High power surgical equipment in the most portable version of the market.
Flexibility
Versions 980nm / 1470nm / 980nm+1470nm
Simplicity
Friendly user interface.
Versatility
Accepts flat or radial fibers.
Stability
America's first-class laser transmitter with stable laser output, extremely low error, and over 10 years of life
1. Patient Preparation When the patient arrives at the facility on the day of the Liposuction, they'll be asked to privately disrobe and put on a surgical gown.
2.Marking the Target Areas The doctor takes some «before» photos and then marks the patient's body with a surgical marker. Markings will be used to represent both the distribution of fat and the proper locations for incisions.
3.Desinfecting the Target Areas Once in the operating room, the target areas will be thoroughly disinfected.
4.Placing Incisions First the doctor (prepares) numbs the area with tiny shots of anesthesia.
5.Tumescent Anesthesia Using a special cannula (hollow tube), the doctor infuses the target area with the tumescent anesthetic solution which contains a mixture of lidocaine, epinephrine, and other substances. The tumescent solution will numb the entire target area to be treated.
6.After the tumescent anesthetic has taken effect, a new cannula is inserted through the incisions. The cannula is fitted with a laser optic fiber and is moved back and forth in the fat layer under the skin. This part of the process melts the fat. Melting the fat makes it easier to be removed using a very small cannula.
Laser lipolysis handle with 5 cannulas and bare fibers optional
(bare fiber: 600um, 800um)
Liposuction cannula helps break up fatty tissue so that it can be easily suctioned and removed from the body. Small precise oscillations allow surgeons to target specific areas safely without damaging the surrounding tissue. This technique is especially useful for treating areas with dense and fibrous adipose tissue.
TR1470nm ergonomically designed handpieces are optimized for comfort and safety. The grip has been engineered to ensure maximum comfort and control during the procedure. The fiber is held firmly in position within the cannula by a locking mechanism. A range of cannula lengths are available to suit all requirements
How long does Endolaser laser TR1470 last?
Results are not only immediate and long-term, but continue to improve for several months following the procedure, as additional collagen builds in the deep layers of the skin. Results are expected to last between 2 to 3 years, and the procedure can be repeated after 1 year.
What areas can be treated by Endolaser TR1470?
Endolaser remodels the entire face: corrects mild sagging of the skin and fat accumulations on the lower third of the face (double chin, cheeks, mouth, jaw line) and neck beyond correcting the skin laxity of the lower eyelid.
How many treatments are needed?
Just one. In case of incomplete results, it can be repeated for a second time within the first 12 months.
Audited Supplier 
){kind=link}
){kind=link}