980nm 1470nm Lipolysis Fat Removal 980nm Laser Collagen Regeneration Face Lifting 1470nm Laser Body Slimming Lipo Sculpture Lipolysis Laser Device

• Laser Type: Diode Laser Gallium-Aluminum-Arsenide Gaalas
• Wavelength: 47W
• Working Modes: Cw, Pulse and Single
• Aiming Beam: 650nm
• Fiber Diameter: 600
• Fiber Type: Bare Fiber
• Model NO.: Laseev
• Fiber Connector: SMA-905 International Standard Interface
• Pulse: 0.00s-1.00s
• Delay: 0.00s-1.00s
• Voltage: 100-240V, 50/60Hz
• Transport Package: Air Box
• Specification: 51*47*46cm
• Trademark: Triangelaser
• Origin: China
• HS Code: 8543909000
• Production Capacity: 1000 Pieces/Year

Product Description

Top sale 1470nm+980nm laser lipolysis slimming system Minimally invasive laser surgery
liposuction precio weight loss laser

 

Laser lipolysis is a less invasive form of liposuction that uses laser energy to liquefy tissue before being vacuumed out, as a result, the fat is easier to remove and there is less trauma in the surrounding areas. This procedure was approved by the FDA in 2006 as a method of fat removal and has been widely used since then.

On top of removing fat, smart lipo also stimulates collagen production to help tighten the skin and boost elasticity. The ideal candidate for smart lipo, however, wants to reduce fat in certain areas but does not have excessively loose skin.

Laser lipolysis  vs. Traditional Liposuction
With traditional Liposuction, the fat is suctioned out with a tube. It  just removes the fat, causing more trauma. 
However, Laser lipolysis uses laser energy to kill and liquify fat before suctioning. Laser lipolysis also has a skin tightening effect due to its stimulation of collagen production.

The laser fiber for Laser lipolysis is very small at 1mm, so the incisions are much smaller than that of traditional liposuction, which uses a 3mm to 5mm tube. The difference in processes makes recovery of Laser lipolysis much easier and less painful than traditional, more invasive liposuction.

Since the laser fiber is so small, Laser lipolysis is perfect for smaller areas of the body, making it possible to treat many more areas of the body.

Laser lipolysis Recovery
Although recovery from Laser lipolysis is easier than traditional liposuction, patients will still experience some pain, discomfort, soreness, and/or numbness. Due to these side effects, you may want to take some time off work if these may affect how you do your job. Most patients go back to all normal activities after about a week of recovery.

After your procedure, you may receive a compression garment to help with the swelling of the treated areas. This will not only help with inflammation but also conform your skin to your new body shape. You will want to wear this compression garment for 1 to 2 weeks, however, this may vary depending on the areas treated and how much fat was removed.

Since Laser lipolysis recovery may include some inflammation, you should check with your doctor before doing any strenuous exercise to prevent any further inflammation or complications. As long as patients maintain a stable weight after this procedure, results will last since Laser lipolysis is a skin tightening procedure on top of fat reduction. It is important to exercise regularly and keep a healthy diet to stay fit and prolong the results of this procedure.

Product Description

Laseev with dual wavelengths of 980nm 1470nm have been used on a large scale for over 20 years. Laser powered by the 980nm diode device along with recent innovations brings the cutting edge technology to Tumescent Liposuction, including targeted fat removal with minimal bleeding and bruising with less physician exertion and a faster recovery in patients. The Laser system consists of a 980nm wavelength device, which specifically targets fat-water absorption with the combined capability of infiltration and suction. The device has an integrated cannula and fiber interface for lasing. Laseev device is most beneficial in the treatment for efficient fat-emulsification and removal of fatty tissues. The unique radial and bare emitting fiber of the device helps in wider and even-heat emission distribution, with precise temperature control capabilities. The results are improved skin tightening, reduced procedure time, high-fat viability for successful grafting and superior clinical results.

Optimal Wavelengths

Laseev laser device operates in the 980nm 1470nm wavelength, which precisely targets water and haemoglobin in soft tissues. It features a higher absorption rate of water,haemoglobin and fat than all other competing devices. The device allows for optimized fat removal, with minimum tissue damage. Laser energy is delivered at a low power density for maximum safety, minimizing the risk of burns.

Laseev laser features the radial and bare emission fiber technology integrated into the equipment.
Laser emission technology is a low-power density approach in Liposuction treatment with multiple benefits including minimizing the risk of burns, distributing the energy evenly throughout the treatment area, removing fat cells more quickly and covering larger tissue area allowing for faster treatment.
The fiber's emission pattern allows for safe, homogenous and more efficient skin tightening during the procedure.
Liposuction cannula helps break up fatty tissue so that it can be easily suctioned and removed from the body. Small precise oscillations allow surgeons to target specific areas safely without damaging the surrounding tissue. This technique is especially useful for treating areas with dense and fibrous adipose tissue.

 

Product Application

Laseev 980nm 1470nm is very effective at targeting stubborn pockets of fat in all areas of the body including:

* the buttocks

* hips and thighs

* abdomen and stomach area

* upper arms

* breast and chest

* neck and chin

* knees

Laser liposuction is a particularly effective treatment for sensitive areas such as the face and neck, where minimal scarring is preferred.Liquefying the fat cells before suctioning them out decreases the risk of contour irregularities. This results in a much smoother skin surface.

Product Parameters

Laser type	Diode Laser Gallium-Aluminum-Arsenide GaAlAs
Wavelength	980nm+1470nm
Power	1-30W for 980nm, 1-17W for 1470nm
Working Modes	CW, Pulse and Single
Aiming Beam	Adjustable Red indicator light 650nm
Fiber type	Radial fiber
Fiber diameter	600 Fiber
Fiber connector	SMA-905 International standard interface, special quartz optical fiber laser transmission
Pulse	0.00s-1.00s
Delay	0.00s-1.00s
Voltage	100-240V, 50/60HZ
Size	51*47*46cm
Gross Weight	20kg

FAQ

How many treatments will I need with Yaser 980nm?

For most patients, typically only one treatment is required. The session may last from 60-90 minutes for each area that is treated. Laser lipolysis is also an ideal choice for "touch ups" and revisions.

What body regions can be treated with Yaser 980nm?

Yaser 980nm is ideal for contouring the abdomen, flanks, thighs, saddlebags, arms, knees, back, bra bulge, and areas of loose or flabby skin.

What can I expect post-treatment?

After the anesthesia has worn off, you may feel the aches and pains that follow a vigorous workout. This is unlike in traditional liposuction where a patient feels as if they were run over by a truck. After the treatment, you will have some bruising and / or swelling. We recommend two days of rest following the procedure. You will wear a compression garment for two to three weeks depending on the area that was treated. You can begin exercising two weeks post procedure.

 

 

Company Profile