980nm Diode Laser Skin Tightening Liposuction Machine Endolaser Lift

• Customization: Available
• Power: 60W
• Wave: 980nm
• Model NO.: Mini-60
• Product Name: 980nm Diode Fiber Laser for Fat Melting
• Laser Type: Diode Laser Gallium-Aluminum-Arsenide Gaalas
• Function: Lipolysis; Liposuction Surgery,Fat Reduction
• Pulse Width: 0-999ms
• Pilot Beam: Adjustable Red Indicator Light 650nm
• Interface: SMA-905 International Standard Interface
• Logo: Interface
• Certification: CE/ISO13485/ISO9001
• Transport Package: Airbox
• Specification: 36*58*38cm
• Trademark: TRIANGEL
• Origin: Beijing
• HS Code: 8543709990
• Production Capacity: 50000

Product Description

980nm Diode Laser Skin Tightening Liposuction Machine Endolaser Lift

Model	YASER 980nm
Laser type	Diode Laser Gallium-Aluminum-Arsenide GaAlAs
Wavelength	980nm
Output Power	30w 60W
Working modes	CW and Pulse Mode
Pulse	0.05-1s
Delay	0.05-1s
Indication light	650nm,intensity control

Firming, lifting and fat reduction during one treatment.

TIRANGELASER Vaser laser liposuction TR980-V1 is the most advanced lipolysis system.

The laser instantly destroys the locally accumulated fat, while stimulating the production of collagen, thanks to which the skin is taut and firm at the treatment site.
Our laser device provides immediate contraction of collagen fibers, reconstruction and tension of the skin structure, followed by an increase in the amount of collagen and skin thickening. In addition, there is also a very superficial and thus safe lipolysis (destruction of fat cells) that allows you to remove excess fat accumulated in the areas of: hamsters, chin, or arms, abdomen, thighs. The treatment is also used to tighten the skin of the face, including the lower eyelid, chin, nose, jaw and neck.

 

Products Advantages

980nm is very effective at targeting stubborn pockets of fat in all areas of the body including:
* the buttocks
* hips and thighs
* abdomen and stomach area
* upper arms
* breast and chest
* neck and chin
* knees
Laser liposuction is a particularly effective treatment for sensitive areas such as the face and neck, where minimal scarring is
preferred.Liquefying the fat cells before suctioning them out decreases the risk of contour irregularities. This results in a much
smoother skin surface.

 

What is lipolysis?
Laser lipolysis is a body-contouring procedure that uses heat from laser devices to destroy fat cells.
Laser lipolysis (or laser lipo, for short) is a body-sculpting treatment that uses heat from light-based technology to melt
fatcells.It's intended mainly to remove body fat that's difficult to lose through diet or exercise, such as:
* saddlebags (fat deposits on the upper outer thighs)
* love handles (belly fat around the torso)
* double chinsIt is also a skin tightening and fat reduction treatment, targeting sagging skin along the lower jawline, abdominal
skin
laxity, cellulite on the buttocks and Inner thigh and arm (bingo wings) skin tightening and fat melting.

With this procedure, there are no incisions and there's no suction.
1. The doctor marks those areas of your body they're going to treat.
2. You lie on a bed and the doctor fits the special applicator to your skin.
3. During the first few minutes of the treatment, you'll feel a cooling sensation that helps keep your skin comfortable throughout
the process.
4. After that, you'll feel alternating warm and cool sensations as the laser begins to destroy your fat cells. This will continue
until the treatment is complete.

What are the advantages of Yaser 980nm over conventional liposuction procedures?

First, both treatments remove fat, but unlike Yaser 980nm, conventional liposuction can leave behind loose skin. Second, because local anesthetic is typically used with Smartlipo treatments (instead of general anesthesia), you're awake during the procedure-that's a real plus, leading to a faster, easier recovery. Third,Yaser can also create a high definition, sculpted look by defining waistlines in women and abdominal muscles in men (six pack).

What is the fiber working way during the treatment?
The training on how to remove the fat properly with right direction.
The 980nm diode laser has an established application as an adjuvant tool in liposuction. In this system, water is the chromophore,
and laser lipolysis through photo chemical effects. Like changes in adipocyte membrane permeability.
And photothermal effects direct adipocyte injury, Which has been shown to be an excellent method for uniform dissolution.

Treatment Effect
laser lipolysis liposuction machine plastic surgery 1470 nm 980 nm fiber optic diode laser fat reduce machine Serious Notice:
1. Always keep the laser and fiber in a clean environment to avoid dust.
2. Clean all the dust on the fiber ends and output coupler before you use the laser.
3. Remove the output coupler's cap when you are going to install the fiber.
4. Remove the caps on the fiber ends when you are going to use it.
5. Clean the both fiber ends with alcohol + cotton ball before you use it.
6. Do not keep the fiber ends or output couplers in the air for too long time.
7. Do not plug-in & plug-out the fiber frequently.
8. No need to remove the fiber every time you finish the treatments. Just keep the fiber connected and this can avoid dust into
the output coupler.
9. If you don't use the laser for a long time, you can remove the fiber and put the caps on.

the steps:

1. Patient Preparation When patients arrive at the hospital on the day of the lipolysis, they are asked to undress and put on a surgical gown in private. 2. Mark the target area The doctor takes some "before" pictures and marks the patient with a surgical marker. Markers will be used to represent fat distribution and appropriate incision locations. 3. Disinfect the target area Once in the operating room, the target area will be thoroughly disinfected. 4a. Incision First, the doctor prepares to numb the area with a small needle. 4b. Incision After anesthesia, the doctor makes small incisions in the skin. 5. Tumescent fluid anesthesia Using a special cannula (hollow tube), the doctor injects a swollen anesthetic solution, which contains a mixture of lidocaine, epinephrine, and other substances (which also stops bleeding), into the target area. The swollen solution will anesthetize The entire target area is treated. 6. Laser lipolysis After the tumescent anesthesia takes effect, a new cannula is inserted through the incision. The cannula is fitted with a laser fiber that travels back and forth in the layer of fat under the skin. This part of the process melts the fat. 7. Fat extraction During this procedure, the doctor moves the suction pump and cannula back and forth to remove the melted fluid fat cells from the body. 8. Closing the incision Finally, the targeted area of the body is cleaned and disinfected, and the incision is closed with a special "Band-Aid". 9. Compression Tights During recovery, patients may wear compression garments to help speed up tissue healing 10. Go home

Precautions and Expected Results of Laser Lipolysis 1. Wear a compression garment for at least two weeks after treatment. 2. You should refrain from using hot tubs, sea water or bathtubs during the 4-week post-treatment period. 3 Antibiotics will be started the day before treatment and continued for up to 10 days after treatment to avoid infection. 4. Light massage of the treated area can be started 10-12 days after treatment. 5. Continuous improvement can be seen within six months.

Company Profile

TRIANGEL RSD LIMITED,is one of the specialized manufactures focused on the Aesthetics &Medical laser equipment in China,established in March 2010.We have our own repair companies & training centers in several countries,like Portugal,Russia,Australia,South Africa... could offer the technical support and clinical training in the fast and efficient way.TRIANGEL got different certificates for clients from all over the world.Medical CE,ISO13485,RoHS;We also take part in exhibitions every year,Cosmoprof Asia(HongKong),DUBAI DERMA, INTERCHARM(Moscow), Expocosmetica(Oporto),AMSCA(South Africa)... 
TRIANGEL,hope to be your Responsible,Sincere and Dependable partner in China!

Buyer feedback

FAQ

1.What Is The facelift Laser Lipolysis Machine?

The 980nm 1470nm facelift laser is a minimally invasive procedure that uses cutting-edge laser technology to tighten and lift sagging, aged skin. The effects reach both deep and superficial layers of the skin to stimulate collagen production whilst also reducing excess fatty tissue.

2. What areas can be treated with laser lipolysis?

It is ideal for small pockets of fat resistant to diet and exercise, as well as for areas difficult to treat with traditional liposuction. Common treatment areas include the thighs, upper abdomen, belly, arms, chin, hips, and more.

3. How long does the procedure take?

Although the actual time it takes to perform the procedure varies depending on the number and extent of the areas treated, on average it can take between 1 and 2 hours.

4. What is the recovery time?

Laser lipolysis provides faster recovery than traditional liposuction. Routine activities can be resumed in a day or two. However, you will be advised to wear a postsurgical garment for one to two weeks to help with the healing process.

5.When Can I Expect To See The facelift Laser Lift Treatment Results?

980nm 1470nm facelift Diode Laser Machine is one of the few minimally invasive procedures with an immediate rejuvenating and skin tightening effect.

6.Is the 980nm treatment long lasting?

Yes! Over the course of a few weeks, the body begins to produce collagen naturally in the deep layers of the skin. As mentioned above, this will continue to build up over the following 6-12 months and improve the appearance of the skin long after the procedure.980nm procedure destroys and removes the treated fat cells. Adults do not create new fat cells. When a person gains weight, that person's fat cells simply expand. Should you gain weight, that fat will most likely be deposited in areas where the procedure was not performed.