The laser lipolysis technique has been used for over a deca-de to treat localized fat to promote skin tightening and to res-hape the body's contour. It is one of the more frequently used procedures in the United States in liposculpture.
Laser lipolysis comprises the subcutaneous application of laser under tumescent anesthesia in the treated area of the body, with or without the subsequent aspiration of molten fat. When in direct contact with the subcutaneous tissue, the energy relea-sed by the laser inflicts irreversible damage on the adipocytes, in addition to thermal damage to the dermal collagen fibers, sti-mulating neocollagenesis and, later, a skin-tightening effect.
Advantages over traditional liposuction, such as shorter recovery time, milder surgical trauma, decreased blood loss, as well as less pain, bruising, and post-surgical swelling, have been demonstrated. The improvement in elasticity and retraction of the skin promoted by laser lipolysis have made this technique an interesting alternative for defining the body's contour. Like tumescent liposuction, laser lipolysis can be performed in an outpatient setting, yielding high rates of patient satisfaction and low rates of complications.
2023 factory supply 980nm 1470nm FIberlift Diode Lipolysis Machine Laser Liposuction Fat Removal Vaser Liposuction device
Minimally invasive procedure The recovery process is minimal You can see the results in a single session!
FIberlift TR1470 by Triangelaser
Triangelaser TR1470 with the most optimal 1470nm wavelength for lifting ,tightening
Laser wavelength 1470nm has very high absorption for water( absorbtion is 40 times better than the wave 980nm) & fatty tissue,which is the best solution for lipolysis and precise facial & body contouring.
In addition to achieving effective lipolysis, the thermal energy generated by the 1470 nm diode laser contracts existing collagen and elastin fibers and stimulates the formation of new collagen for firmer, tighter-looking skin
.
FIberlift TR1470 is a minimally invasive outpatient laser procedure used in endo-tissutal (interstitial) aesthetic medicine,which has multiple purposes: the remodeling of both deep and superficial layers of the skin, toning, the retraction of connective septums, the stimulation of collagen production and, when necessary, the reduction of excessive fat.
The main activity of FIberlift TR1470 is promoting skin tightening, in other words the retraction and reduction of skin laxity thanks to the activation of neo-collagenesis and of metabolic functions in the extra cellular matrix.
TR1470nm is very effective at targeting stubborn pockets of fat in all areas of the body including:
* the buttocks:
* hips and thighs
* abdomen and stomach area
* upper arms
* breast and chest
* neck and chin
* knees
Laser liposuction is a particularly effective treatment for sensitive areas such as the face and neck, where minimal scarring is preferred.Liquefying the fat cells before suctioning them out decreases the risk of contour irregularities. This results in a much smoother skin surface.
1.Nasolabial Folds
The nose to mouth lines are also a great indication for treatment since the nasolabial fat pad can be reduced by melting fat cells and tightening the overlying skin.
2. Abdomen
Loose sagging skin over the abdomen, with a small degree of stubborn fat accumulation is certainly treatable with Laseev 980+1470nm. Women who have residual skin laxity from excessive stretching after pregnancy may also be suitable for this treatment.
3.neck area
If your concern is crepey, loose skin on the neck, then diode laser 980+1470nm is the perfect treatment choice. It will retract and tighten the skin resulting in a firmer, smoother appearance.
Liposuction cannula helps break up fatty tissue so that it can be easily suctioned and removed from the body. Small precise oscillations allow surgeons to target specific areas safely without damaging the surrounding tissue. This technique is especially useful for treating areas with dense and fibrous adipose tissue.
TR1470nm ergonomically designed handpieces are optimized for comfort and safety. The grip has been engineered to ensure maximum comfort and control during the procedure. The fiber is held firmly in position within the cannula by a locking mechanism. A range of cannula lengths are available to suit all requirements
TR1470 FIberlift laser is usually done in the doctor's clinic under local anesthesia & the laser actually makes any wrecked blood vessels to clot instantly, decreasing bruising dramatically. This process results in very negligible bleeding, bruising or swelling, making it the most sought after fat removal procedures among the adults.
1. Patient Preparation When the patient arrives at the facility on the day of the Liposuction, they'll be asked to privately disrobe and put on a surgical gown.
2.Marking the Target Areas The doctor takes some «before» photos and then marks the patient's body with a surgical marker. Markings will be used to represent both the distribution of fat and the proper locations for incisions.
3.Desinfecting the Target Areas Once in the operating room, the target areas will be thoroughly disinfected.
4.Placing Incisions First the doctor (prepares) numbs the area with tiny shots of anesthesia.
5.Tumescent Anesthesia Using a special cannula (hollow tube), the doctor infuses the target area with the tumescent anesthetic solution which contains a mixture of lidocaine, epinephrine, and other substances. The tumescent solution will numb the entire target area to be treated.
6.After the tumescent anesthetic has taken effect, a new cannula is inserted through the incisions. The cannula is fitted with a laser optic fiber and is moved back and forth in the fat layer under the skin. This part of the process melts the fat. Melting the fat makes it easier to be removed using a very small cannula.
|
Laser type |
Diode Laser Gallium-Aluminum-Arsenide GaAlAs |
|
Wavelength |
1470nm |
|
Power |
17W with Germany generator |
|
Working Modes |
CW, Pulse and Single |
|
Aiming Beam |
Adjustable Red indicator light 650nm |
|
Fiber type |
Bare fiber |
|
Fiber diameter |
400 600 Fiber |
|
Fiber connector |
SMA-905 International standard interface, special quartz optical fiber laser transmission |
|
Pulse |
0.00s-1.00s |
|
Delay |
0.00s-1.00s |
|
Voltage |
100-240V, 50/60HZ |
|
Size |
51*47*46cm |
|
Gross Weight |
6kg |
How long does FIberlift laser TR1470 last?
Results are not only immediate and long-term, but continue to improve for several months following the procedure, as additional collagen builds in the deep layers of the skin. Results are expected to last between 2 to 3 years, and the procedure can be repeated after 1 year.
What areas can be treated by FIberlift TR1470?
FIberlift remodels the entire face: corrects mild sagging of the skin and fat accumulations on the lower third of the face (double chin, cheeks, mouth, jaw line) and neck beyond correcting the skin laxity of the lower eyelid.
How many treatments are needed?
Just one. In case of incomplete results, it can be repeated for a second time within the first 12 months.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}